How to connect Milesight Gateway to Infodeck LoRaWAN Network Server (LNS)
Judy
Last Update 6 months ago
Setup Gateway
1. Go to gateway web GUI and make sure that your gateway can connect to the Internet successfully.
2. Go to Packet Forwarder > General, disable Embedded NS and create a new Destination.
3. Set the type as Semtech, input the Server Address "lns.as923.infodeck.io" and enter the server port up 1700 & port down 1700, then click Save.
![](https://tawk.link/64d38a7bcc26a871b02e3bf7/kb/attachments/4RHx73qLAT.png)
4. Check the status on the Infodeck LNS Gateway page. If the gateway connects to Infodeck LNS successfully, it will show Online in green.